Wire earbuds deal with stress more often while using them. Broken wires are the common reason why one of your earbuds stops working. After using the earbuds for a while, the tiny wires inside the earbuds get broken. As a result, earbuds stop working.
Why is only one of my Jlab earbuds working?
The Jlab wireless earbuds are small parts consisting of tiny batteries, speakers, and wires that connect the speakers with the battery. All of these parts should be properly connected and working in normal condition.
Failure of the parts could affect the earbuds. It stopped working, and no sound would be produced. You may have to repair it.
The majority of the time, the problem is with the wired connection. Wires connected to the speakers and batteries may get removed because of accidental bumps or shaking too harshly. These tiny parts are susceptible.
When the speaker gets disconnected from the power source, it will not be able to receive the songs from the connected device. Bluetooth connectivity will not establish, and your earbuds are no longer helpful for listening to songs.
Get it to repair from the speakers repairing stores. Experts will help you to get your earbuds working again. In the case of wired earbuds, the problem would be with the wires.
Earbuds wires are made of a tiny string of copper wires. They easily get broken when you stretch them. Also, sometimes you mistakenly pull the earbuds wires with a force which could damage the earbuds connection.
So if you are facing a problem with the jlab earbuds, then one of the reasons given above could be causing the problem.
Why is only one of my Bose earbuds working?
Before you draw any conclusion, try resyncing the earbuds. There is a possibility that the boss’s earbuds are having trouble with Bluetooth. Either the earbuds have lost the connection, or your device has a Bluetooth issue.
Use the below steps to recheck everything is working fine.
- Start with Bluetooth. Disconnect Bose earbuds. Switch off the device as well as the earbuds for five minutes. Connect it again as usual and see if it gets connected.
- Charging of earbuds may have some problems. Earbuds consist of a tiny gap underneath made of copper. It should adequately connect with the batteries in the charging pod. Check the indicator to ensure the electricity flows from the pods to the earbuds. Charging will not happen if there is a gap between the earbuds and the charging pod.
- The charging case is defective. Earbuds have only one source to pull the power. If the charging case fails to supply power to the earbuds, the batteries in the earbuds will not be able to connect.
- The earbuds parts might have a problem. You may have to consult with the repair guy to fix the problem.
Why is only one of my Indy earbuds working?
Your Indy earbuds might have trouble connecting with either the device or power source. The problem occurs when the necessary parts are disconnected. Earbuds mostly get the issue when their internal parts are detached.
When the earbuds fall from the height, the inbuilt batteries connected to the speakers get disconnected. When there is no power supply to the earbuds, they will stop working. In this case, you may have to open the earbuds cover to check if everything is connected correctly.
Indy earbuds are made of durable material. So they last longer. However, as the device becomes old, the wearing and tearing are common in every electronic device. Besides that, the parts of the earbuds are more sensitive.
So you should use it carefully. A hard bump on the earbuds when it falls from a height could cause the internal part to be damaged.
The non-working earbuds might have problems with the parts. Either the batteries are not charging, or the Bluetooth connectivity is having trouble.
Consult with the repair guy to diagnose the problem. Battery issues and broken wires cause earbuds to stop working in most cases.
Why is only one of my Bluetooth earbuds working?
Bluetooth earbuds might have been damaged. The internal parts are susceptible. When earbuds fall from the height, the internal parts get damaged. The wire connection that joins the speakers and batteries inside the earbuds might have disconnected.
Lose connection will not stop batteries from charging. As a result, the Bluetooth earbuds stop working.
The only way to fix the problem is to repair the earbuds. Reach the nearby repair store. The repair guy will reconnect the wires, and your earbuds will be functional again. It would not cost much to get the earbuds repaired.
Why is only one of my Skullcandy earbuds working?
The functional damage may cause the Skullcandy earbuds to stop working. Sadly you cannot do much once the earbuds are not getting connected. Only a repair guy can help you with fixing.
A major problem with the Skullcandy earbuds is the built quality. The earbuds cover is made so that you cannot easily open it. Thus, you need experts to handle the repair. It is not the job of a layman.
It would be best to have the necessary tool to remove the top cover and fix it. If the wires are broken, the new wires need to replace.
The wires are shoulder to parts that connect the device with the speakers and batteries. So do not try to repair it yourself if you do not have the right tool.
Why is only one of my Indy Evo earbuds working?
Indy Evo earbuds are made of high-quality material. They generally do not show issues. If you have trouble using it, ensure that it is connected precisely.
Disconnect the earbuds and connect them again after five minutes. See if the problem gets resolved.
Reset the device again and see if you can connect it. It may resolve the pairing issues. Place the Indy earbuds in the charging case and see if the battery indicator is functioning correctly. Both earbuds are separately charged.
The indicator will tell you if the power supply is working or not. If the indicator is not turning on when the earbuds are kept in the charging pods, the batteries might have an issue.
Also, the possibilities are the wires that connect the batteries with the charging connection might be broken.
Why is only one of my Jbl earbuds working?
JBL earbuds are not interconnected. It works separately when you power on the device. It is a truly wireless Bluetooth headset that offers instant connectivity to the design and a seamless music experience.
When you connect the JBL earbuds, they connect separately. First, the right one gets connected, and next, the left earbuds.
If the left one is taking the time or showing some errors while connecting it to the device, try to disconnect both again and rest the setting.
If required, remove the Bluetooth name of the JBL from the device. It will erase all the early settings and connect them with the new details.
Put both earbuds back into the charging pod. Then, please wait for a few minutes and allow it to charge. Once earbuds are charged sufficiently, you can try to connect them again. See if the earbuds recognize the device again. If the issue persists, then you have to repair it.
You may have to consult with the repair store. They will open the earbuds and try to find out the damaged component. If the speaker is damaged, you may have to replace it with a new speaker.
Original JBL speakers are expensive. It may cost a lot as JBL speakers are made of unique material. So talk to the repair guy and see the possibility of getting the earbuds repaired at an affordable price.
Why is only one of my Soundcore earbuds working?
You might have mistakenly dropped the Soundcore earbuds. Or it might have been handled harshly, which may cause the earbuds to stop working.
If you have been using the earbuds for quite a long time, then the chances are the components might be broken inside. If the earbuds are bought recently, the device might be faulty.
Soundcore earbuds are made of durable material; thus, the lifespan of the earbuds is relatively high. Damage components in the earbuds need replacement. You can contact the manufacturer and ask them to replace it.
Why is only one of my Tozo earbuds working?
Tozo earbuds might have lost connection inside the device. Either the charging pod is damaged, or the components of the earbud are loosely connected. In the majority of the case, the wires that connect the speakers to the batteries gets disconnected.
In this case, you have to open the earbuds and reconnect them with the help of shouldering machine. If you do not know how to open it, getting it repaired from the local electronic repair store is advisable.
Damaged batteries may also cause the one side of Tozo earbuds to stop working. Diagnose the issue before you conclude.
Earbuds are cheap to repair. Speakers are the only expensive component of the earbuds.
Everything else can be repaired with the primary solution.
Why is only one of my Raycon earbuds working?
There are possibilities that one side of the rayon earbuds is damaged. When the earbuds fall, the hard bump on the device could cause the internal component to be damaged.
Lose connection also cause the earbuds to stop working. First, check the batteries and charging pods. If both are working fine, then the earbuds itself is broken.
You may have to get it fixed from the repair store.