Skullcandy Indy Evo earbuds are a popular choice for music enthusiasts looking for wireless earbuds that deliver high-quality sound.
However, some users have reported issues with their earbuds not pairing together, which can be frustrating and impact their overall listening experience.
The main cause of this problem is often Bluetooth connectivity issues, but there are several other possible causes to consider as well.
In this article, we will explore the possible causes of this issue and provide troubleshooting steps to help users get their Skullcandy Indy Evo earbuds working properly again.
Why won’t my Indy Skullcandy earbuds connect to each other?
As we’ve mentioned earlier there are many possible causes for this problem. But according to our experience, the following are the most common causes that we’ve identified so far.
- Bluetooth connectivity issues
Bluetooth connectivity can be a common culprit when it comes to earbuds not pairing together.
This can be caused by interference from other Bluetooth devices, outdated Bluetooth drivers, or simply a weak connection.
- Battery drain
Low battery levels can also cause issues with earbuds pairing together. If one or both earbuds have a low battery, they may not be able to establish a connection with each other or with the device they’re paired with.
- Interference from other devices
Other devices in the vicinity, such as Wi-Fi routers, microwaves, or other Bluetooth-enabled devices, can cause interference that disrupts the pairing process.
- Outdated firmware
Firmware is the software that runs on the earbuds themselves, and if it’s outdated, it can cause problems with pairing. Updating the firmware can sometimes resolve these issues.
- Physical damage to the earbuds
Finally, physical damage to the earbuds can also cause pairing issues. If the earbuds have been dropped or subjected to other types of physical trauma, they may not function properly and may require repair or replacement.
How to troubleshoot the problem?
Usually, these problems can be solved on your own with some simple troubleshooting steps, and it will save a lot of time and effort. So the following troubleshooting steps will help you in this case.
01. Clearing pairing history and resetting earbuds
This involves clearing the pairing history of the earbuds from your phone or device and then resetting the earbuds.
The exact process for this may vary depending on the device you’re using but typically involves holding down the button on the earbuds for a certain amount of time until they reset.
02. Updating firmware
Checking if there is any new firmware available and updating the earbuds if necessary. This can help to fix any software-related issues that may be causing the pairing problem.
03. Checking battery levels
Ensuring that both earbuds have sufficient battery levels. If one earbud has a low battery level, it may not pair with the other earbud.
04. Checking Bluetooth connection
Checking if the earbuds are properly connected to the device you want to pair them with. Make sure that the device’s Bluetooth is turned on and that it’s in pairing mode.
05. Avoiding interference
If there are other devices nearby that could be interfering with the earbuds’ Bluetooth connection, try moving away from them or turning them off. Also, try to avoid any sources of interference such as microwave ovens, routers, or other wireless devices.
By following these troubleshooting steps, users can identify and fix the root cause of the problem and get their Skullcandy Indy Evo earbuds to pair together again.
How to reset Skullcandy Indy Evo?
To reset your Skullcandy Indy Evo earbuds, follow these steps:
- Place your earbuds into the charging case and make sure they’re charging.
- Press and hold the button on both earbuds for 10 seconds. You’ll see the LED lights on both earbuds flash red and blue.
- After 10 seconds, release the buttons on both earbuds. The LED lights on both earbuds will turn off, indicating that the reset is complete.
Note: You can also reset the earbuds by removing them from the charging case and then pressing and holding the button on each earbud for 10 seconds until the LED lights flash red and blue.
Once the reset process is complete, the earbuds will be in pairing mode, and you can pair them again with your device.
Common Pitfalls to Avoid
Here are the common pitfalls to avoid when troubleshooting Skullcandy Indy Evo earbuds not pairing together.
- Misunderstanding the reset process
It is essential to follow the correct reset process to avoid making things worse. Sometimes, users misunderstand the reset process and end up making the problem worse by losing some important data.
It is important to carefully read and follow the instructions provided in the user manual or the manufacturer’s website to avoid such issues.
- Failing to update the firmware
Many users tend to ignore firmware updates, which can lead to various issues, including problems with pairing earbuds. It is crucial to keep the earbuds’ firmware updated to ensure smooth performance and avoid compatibility issues.
- Neglecting battery life
One of the common causes of earbuds not pairing together is low battery levels. Failing to check the battery levels before using the earbuds can lead to a lot of frustration.
It is important to ensure that both earbuds have enough battery life to pair and work correctly.
- Incorrect Bluetooth pairing
Sometimes, users fail to pair the earbuds correctly, which can lead to issues with pairing. It is essential to follow the correct pairing process and ensure that the earbuds are paired with the correct device.
By understanding and avoiding these common pitfalls, users can troubleshoot Skullcandy Indy Evo earbuds pairing problems more effectively and avoid any unnecessary issues that may arise during the process.
Some related FAQs.
Why is one of my Skullcandy earbuds flashing red and blue?
Your Skullcandy wireless headphones may be in discovery mode if they are flashing blue and red (which they automatically do when not connected to a Bluetooth device). In this case, all you have to do is make sure they are matched.
Why is my Skullcandy earbud staying red?
The LEDs typically display solid RED when they are powered off and charging. You will hear the power-on “ping” tone when you remove your earbuds from the case, indicating that they have turned on automatically. To turn both earbuds off and start charging, put them back into the case.
How do I factory reset my earbuds?
Turn them on after removing them from the case. Connect a power source to the case. In the meanwhile, tap and hold the control panels for 6 seconds while putting the earphones back in their case. You can reconnect them to your device after resetting them to their factory settings.